How to Install Infratech Heaters

Infratech heaters offer a sophisticated and efficient solution for providing comfortable outdoor heating in a variety of settings, from residential patios to commercial spaces. These electric heaters are designed to emit radiant heat, creating a cozy and warm atmosphere even on chilly days and nights.

“Warmth is not a season. It’s a feeling.”

Now, isn’t that a wonderful thought? Imagine transforming your patio, balcony, or outdoor kitchen into a warm and inviting sanctuary, even in the midst of winter. That’s the magic of Infratech heaters. 

Whether you’re a homeowner seeking to level up your outdoor living, or simply an enthusiast who finds solace under the open sky, this guide is for you. We’re going to dive into the nuts and bolts of installing these life-enhancing heaters. So, grab your tool kit and let’s get started!

Things You Need to Know Before Installing Infratech Heaters

  • Infratech heaters can be mounted on walls, ceilings, or poles.
  • Infratech heaters are safe to use and do not emit harmful gases or fumes.

Pre-Installation Preparation

Checking Local Regulations and Codes

Before you begin the installation process, it’s essential to research and understand any local regulations, permits, or building codes that may apply to outdoor heater installations. Contact your local authorities or consult a professional to ensure compliance with safety and electrical codes.

Selecting the Ideal Heater Locations

Determine the optimal locations for installing your Infratech heaters. Consider factors such as the layout of the space, seating arrangements, and prevailing wind patterns. Proper placement will ensure even heat distribution and an enjoyable outdoor experience for your guests.

Gathering Necessary Tools and Materials

To successfully install Infratech heaters, you will need the following tools:

  • Power drill with appropriate bits
  • Screwdrivers (flathead and Phillips)
  • Wire stripper and crimper
  • Adjustable wrench
  • Spirit level
  • Measuring tape
  • Ladder or scaffolding (if needed)

Required Wiring and Mounting Hardware

Gather the necessary materials for mounting and wiring the heaters:

  • Infratech heaters and mounting brackets
  • Mounting plates or frames
  • Electrical conduit and weatherproof junction boxes
  • Weather-resistant screws and anchors
  • Electric cables of the appropriate gauge
  • Wire connectors and conduit fittings

Installation Steps 

Now, the fun part begins. Here are step-by-step instructions to install your Infratech heater. Brace yourself, you’re about to become a DIY superstar! 

  1. Safety First: Before you start, make sure to turn off the power supply to the designated areas where you’ll be working. Safety goggles and gloves are recommended.
  2. Assemble Mounting Brackets: Follow the manufacturer’s instructions to attach the mounting brackets to the chosen locations. Ensure they are securely fastened and level.
  3. Mounting Plates/Frames: If your chosen mounting brackets require additional plates or frames, attach them securely to the brackets. These plates provide a stable surface for mounting the heaters.
  4. Install Weatherproof Junction Boxes: Install weatherproof junction boxes near each heater location. These boxes will house the electrical connections and protect them from the elements.
  5. Routing Electrical Conduit: Run electrical conduit from each weatherproof junction box to the power source. Use appropriate conduit fittings to secure the conduit in place and protect the wiring.
  6. Wiring Preparation: Strip the insulation from the ends of the electric cables. Follow the manufacturer’s guidelines for the appropriate gauge of cable to use based on the heater’s electrical requirements and distance from the power source.
  7. Wire Connections: Inside the weatherproof junction boxes, connect the wiring from the heaters to the electrical cables using wire connectors. Make sure the connections are secure and well-insulated to prevent any exposure to moisture.
  8. Mounting Heaters: Carefully lift and mount each Infratech heater onto the mounting brackets or plates. Secure them using weather-resistant screws and anchors. Double-check that they are level and properly aligned.
  9. Final Checks: Once all the heaters are securely mounted, double-check all connections, screws, and brackets for tightness and stability.
  10. Power Connection: Connect the electrical cables from the heaters to the power source according to local electrical codes. This may involve connecting to a dedicated circuit and installing a dedicated breaker in your electrical panel.
  11. Testing: Turn on the power supply and test each heater individually to ensure they are functioning properly. Check for any unusual sounds or smells during the initial operation.
  12. Finishing Touches: Conceal any exposed wiring within the conduit and junction boxes. Seal the boxes to prevent water ingress and ensure the entire installation is weatherproof.
  13. Regulatory Compliance: If required by local regulations, have the installation inspected by a certified electrician or relevant authorities to ensure it meets safety standards.
  14. Enjoy Your Outdoor Space: Once the installation is complete and everything is verified to be in safe working condition, you’re ready to enjoy your cozy outdoor space, no matter the season!

And there you have it, your cozy outdoor space just got a whole lot cozier. Now, invite your friends over, because you’ve got some bragging to do. After all, you’ve just installed an Infratech heater like a pro!

Troubleshooting Tips: Common Issues You May Encounter and How to Fix Them

Installing Infratech heaters can provide efficient and reliable outdoor heating solutions. However, like any installation project, challenges may arise that require troubleshooting and problem-solving. This guide aims to equip you with the knowledge and strategies to effectively address common installation issues with Infratech heaters. By understanding these challenges and following the recommended steps, you can ensure a successful and trouble-free installation process.

Importance of Troubleshooting

Ensuring Optimal Heater Performance

Proper troubleshooting during Infratech heater installation is essential to ensure that your heaters function optimally. Identifying and addressing issues promptly can prevent inefficient heat distribution, inadequate warmth, or complete heater malfunctions, guaranteeing a comfortable outdoor experience for you and your guests.

Safety Considerations

Troubleshooting installation issues not only enhances performance but also ensures safety. Electrical problems or improper mounting can pose risks, including electric shock or structural damage. By addressing installation challenges, you contribute to a safe and secure outdoor heating environment.

Preventing Installation Issues

Thorough Planning and Preparation

Comprehensive planning before installation can minimize potential challenges. Take time to review the manufacturer’s instructions, understand electrical requirements, and carefully choose optimal heater locations. This preparation will help you anticipate and address issues effectively.

Proper Tools and Equipment

Having the right tools and equipment on hand is crucial for a successful installation. Ensure you have all necessary tools, including drills, screwdrivers, wiring materials, and mounting hardware. Proper tools facilitate smoother installation and troubleshooting processes.

Common Installation Challenges

Uneven Heat Distribution

Issue: Uneven heat distribution across the intended area.

Electrical Connection Problems

Issue: Heaters not turning on, insufficient power supply, or tripped circuits.

Mounting and Alignment Issues

Issue: Heaters not securely mounted or misaligned, affecting heat direction.

Troubleshooting Steps

Identifying the Problem

Thoroughly assess the issue and its possible causes. Isolate whether the problem is related to wiring, mounting, alignment, or other factors.

Step-by-Step Solutions

Uneven Heat Distribution:

  • Verify the mounting brackets or plates are level and secure.
  • Ensure the heaters are positioned at the recommended height and angle.
  • Adjust the alignment of individual heaters for balanced heat coverage.

Electrical Connection Problems:

  • Check the power supply and confirm that circuit breakers are functioning.
  • Inspect wiring connections, ensuring they are properly connected and insulated.
  • Verify that control panels or switches are programmed correctly.

Mounting and Alignment Issues:

  • Reassess the mounting brackets and ensure they are properly installed.
  • Adjust the angle of the heaters to direct heat where needed.
  • Double-check the alignment of each heater with the intended heating area.

When to Seek Professional Help

Complex Electrical Problems

If you encounter complex electrical issues, such as persistent power failures or unfamiliar wiring challenges, it’s advisable to consult a licensed electrician. They can diagnose and address intricate electrical problems safely and effectively.

Structural Modifications

For mounting or structural issues that require significant modifications to your outdoor space, consider seeking professional assistance. Experienced installers can make necessary adjustments while ensuring the structural integrity of your surroundings.

Maintaining and Cleaning Your Infratech Heater

If there’s one thing we love, it’s a well-maintained, sparkling clean Infratech heater. Not only does regular upkeep ensure your heater runs smoothly, but it also enhances the longevity of the unit. Here, we’ve curated a list of seven essential steps to help you maintain and clean your Infratech heater in the best possible way. 

1. Why Maintenance and Cleaning Matter

Benefits of Regular Maintenance

Routine maintenance offers several key benefits for your Infratech heaters:

  • Optimal Performance: Well-maintained heaters provide consistent and efficient heat output, ensuring a comfortable outdoor environment.
  • Energy Efficiency: Clean heaters operate more efficiently, reducing energy consumption and minimizing operating costs.
  • Longevity: Proper care extends the lifespan of your heaters, protecting your investment and avoiding premature replacements.
  • Safety: Regular maintenance helps identify and address potential safety hazards, promoting a secure heating experience.

Impact on Heater Performance

Over time, dust, dirt, and debris can accumulate on the heating elements and reflectors of your Infratech heaters. This buildup can obstruct the radiant heat emission and reduce the effectiveness of the heaters. Additionally, wear and tear on components may lead to uneven heating or even complete malfunctions. By incorporating a maintenance and cleaning routine, you can ensure that your heaters continue to provide reliable and consistent warmth.

2. Safety First

Disconnecting Power

Before you begin any maintenance or cleaning tasks, it’s crucial to disconnect the power supply to your Infratech heaters. This precautionary step prevents accidental electric shocks or injuries while you work on the units.

Allowing Cool-Down Time

Allow your heaters sufficient time to cool down before starting any maintenance tasks. Touching hot surfaces can result in burns or discomfort. As a general rule, wait at least an hour after turning off the heaters before you begin cleaning.

3. Cleaning Your Infratech Heater

Gather the following cleaning supplies before you start:

  • Soft lint-free cloths
  • Mild dish soap or specialized outdoor heater cleaner
  • Soft-bristle brush or microfiber duster
  • Water source and hose (if cleaning exterior surfaces)

Step-by-Step Cleaning Process

  1. Dusting: Begin by using a soft-bristle brush or microfiber duster to gently remove loose dirt and debris from the heating element and reflector. Pay special attention to crevices and corners where dirt may accumulate.
  2. Wiping Down: Dampen a lint-free cloth with a mixture of mild dish soap and water. Gently wipe down the heating element, reflector, and any exterior surfaces. Avoid using excessive water, especially on electrical components.
  3. Rinsing (Optional): If your heaters have exterior surfaces that are heavily soiled, you can rinse them with a hose. Ensure that no water enters the electrical components or connections. Allow ample time for the heaters to dry completely before reconnecting power.

4. Inspecting for Wear and Damage

Visual Inspection

Regular visual inspections help identify any signs of wear, damage, or deterioration. Check for:

  • Cracked or chipped reflectors
  • Corrosion on metal components
  • Loose or frayed wires
  • Discoloration of heating elements

Addressing Minor Issues

If you discover minor issues during your inspection, address them promptly. Tighten loose screws, replace damaged reflectors, and fix any exposed or damaged wiring. Ignoring these issues can lead to more significant problems down the line.

5. Seasonal Maintenance Routine

Preparing for Seasonal Changes

As seasons change, adjust your maintenance routine accordingly:

  • Spring: Perform a thorough cleaning and inspection to remove any debris that accumulated during winter. Check for any damage caused by cold weather or moisture.
  • Summer/Fall: Continue regular dusting and cleaning to prevent buildup. Ensure that heaters are functioning optimally before the colder months.

Winterizing Your Heaters

Before the onset of winter, consider the following steps to protect your heaters:

  1. Covering: If your heaters will not be in use during winter, consider covering them with weatherproof covers to shield them from harsh elements.
  2. Storage: If you decide to store your heaters indoors during winter, clean them thoroughly, disconnect any electrical connections, and store them in a dry and safe location.

6. Common Maintenance Mistakes to Avoid

Using Harsh Chemicals

Avoid using harsh chemicals or abrasive cleaners when cleaning your Infratech heaters. These substances can damage the heating elements, reflectors, and exterior finishes, compromising their performance and appearance.

Neglecting Regular Checks

Failing to conduct regular maintenance checks can lead to unnoticed issues that worsen over time. Incorporate a maintenance schedule and stick to it to ensure the longevity and reliability of your heaters.

7. Professional Servicing and Repairs

When to Seek Professional Help

While regular maintenance can address most minor issues, there are situations where professional servicing is necessary:

  • Complex Repairs: If you encounter significant electrical or mechanical issues, it’s best to consult a qualified technician for repairs.
  • Warranty Maintenance: Adhere to manufacturer guidelines for warranty maintenance to avoid voiding the warranty.

Choosing Qualified Technicians

When seeking professional assistance, ensure that you hire certified technicians with experience in outdoor heater maintenance and repairs. Look for reputable service providers who specialize in the type of heaters you own.


Installing Infratech heaters can significantly enhance your outdoor living space, allowing you to enjoy comfortable warmth during cooler seasons. By carefully following the step-by-step instructions outlined in this guide, you can ensure a successful and safe installation process. Remember to prioritize safety, adhere to local codes, and consider seeking professional assistance if needed. With your Infratech heaters properly installed and maintained, you’ll be able to create memorable outdoor experiences for years to come.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *